Swing Turnstile Series Gate Smart Access Control System Gate for Stadium
Product Parameters
| Model NO. | K3282 |
| Size | 1400x250x980mm |
| Main Material | 1.5mm Top cover + 1.2mm Body SUS304 + Stainless steel barrier poles |
| Pass Width | 600-1100mm |
| Pass Rate | 35-50 person/min |
| Working Voltage | DC 24V |
| Power | AC 220±10%V 50HZ |
| Communication Interface | RS485 |
| Open signal | Passive signals (Relay signals, Dry contact signals) |
| MCBF | 3,000,000 Cycles |
| Motor | 40K 20W Brushed DC motor |
| Infrared Sensor | 5 pairs |
| Working Environment | ≦90%, No condensation |
| Applications | Stadium, Scenic spot, Campus, Bus station,Government agency, etc |
| Package Details | Packed into wooden cases, Single/Double: 1485x365x1180mm, 70kg/90kg |
Product Descriptions
Brief introduction
The swing gate is a kind of bidirectional way speed access control equipment designed for places with high class security requirements. It is easy to integrate with IC access control, ID access control, QR code scanner, fingerprint, face recognition and other identification devices. It realizes the intelligent and efficient management of passage.
Applications: Mainly used for Stadium, Scenic spot, Campus, Bus station,Government agency, etc
·Varied pass mode can be chosen flexibly
·Standard signal input port, can be connected with most of the access control board, fingerprint device and scanner other equipment
·The turnstile has automatic reset function, if people swipe the authorized card, but don’t pass through within the settled time, it need to swipe card again for entry
·Card-reading Recording function: single-directional or bi-directional access can be set by the users ·Automatic opening after emergency fire signal input
·Pinch protection ·Anti-tailgating control technology
·Automatic detection, diagnosis and alarm, sound and light alarm, including trespassing alarm, anti-pinch alarm and anti-tailgating alarm
·High light LED indicator , displaying passing status.
·Self diagnostic and alarm function for convenient maintenance and use
·The swing gate will automatically open when power failure (connect 12V battery)
Brushless Swing turnstile control board
1. Arrow + three-color light interface
2. Double anti-pinch function
3. Memory mode 4. Multiple traffic modes
5. Sound and light alarm
6. Dry contact / RS485 opening
7. Support fire signal access
8. LCD display
9. Support secondary development
·Molding: Die-cast aluminum one-piece molding, Special surface spray treatment
·High efficient: High precision 1:3.5 spiral bevel gear bite transmission
·Mechanical anti-pinch: Built-in special asbestos friction sheet
·High strength: The drive wheel is made of bearing steel, Hardened surface nitriding treatment
·Long life time: Measured 5 millions times
·Most Components are Made of mould, which is much more stable, unity of quality
·Use special snap-in type reader panel, need only 5s to fix and disassemble, which is much more convenient for maintain
·1200mm length design housing, can be used for most sites
·280mm width enough housing, can put large access controller inside
·Use the most stable Swing gate PCB board
·Can be used for both indoor and outdoor
·5 pairs high safety Infrared Sensors
·3-5 days fast delivery
·Customization is acceptable
·Can satisfy with 80% customer’s requirements
Product Dimensions
Project Cases
Swing Turnstile Gate installed at Singapore National Sports Centre
