20201102173732

Products

304 Stainless Steel China Wholesale Swing Turnstile Supplier Swing Barrier

Functions: Mechanical anti-pinch, Anti-tailgating

Features: Large housing Swing barrier gate with 1100mm wide lane, which can pass Wheelchair and Pedestrians with luggage, Pedestrians carrying bicycles or trolley

OEM & ODM : Support Deliverability: 3,000 units per month


Product Detail

Product Tags

Product Descriptions

Function Features

·Varied pass mode can be chosen flexibly;

·Standard signal input port, can be connected with most of the access control board, fingerprint device and scanner other equipment

·The turnstile has automatic reset function, if people swipe the authorized card, but don’t pass through within the settled time, it need to swipe card again for entry

·Card-reading Recording function: single-directional or bi-directional access can be set by the users

·Automatic opening after emergency fire signal input

·Pinch protection

·Anti-tailgating control technology

·Automatic detection, diagnosis and alarm, sound and light alarm, including trespassing alarm, anti-pinch alarm and anti-tailgating alarm

·High light LED indicator , displaying passing status.

·Self diagnostic and alarm function for convenient maintenance and use

·The Gate will automatically open when power failure (connect 12V battery) Applications: Mainly used for Communities, Factories & Construction sites, etc

343-5126 (6)
343-5126 (5)

#304 stainless steel

Anti-rust Wear resistance

High temperature resistance

Corrosion resistance

3483 (7)

Mould-made mechanical flap barrier gate machine core

Housing: Die-cast aluminum one-piece molding/special spraying treatment

Gear: High-strength bearing steel/nitriding treatment

machine core of stadium turnstile

Swing barrier gate drive board

Arrow + three-color light interface

Double anti-pinch function

Memory mode

Multiple traffic modes

Sound and light alarm

Dry contact / RS485 opening

Support fire signal access

LCD display

Support secondary development

3483 (2)

Product Descriptions

·Molding: Die-cast aluminum one-piece molding, Special surface spray treatment

·High efficient: High precision 1:3.5 spiral bevel gear bite transmission

·Mechanical anti-pinch: Built-in special asbestos friction sheet

·High strength: The drive wheel is made of bearing steel, Hardened surface nitriding treatment

·Long life time: Measured 5 millions times

machine core of sports stadium turnstile

·Most Components are Made of mould, which is much more stable, unity of quality

·Use special snap-in type reader panel, need only 5s to fix and disassemble, which is much more convenient for maintain

·1200mm length design housing, can be used for most sites

·280mm width enough housing, can put large access controller inside

·Use the most stable Swing gate PCB board

·Can be used for both indoor and outdoor

·5 pairs high safety Infrared Sensors

·3-5 days fast delivery ·Customization is acceptable

·Can satisfy with 80% customer’s requirements

machine core of stadium turnstile

Product Dimensions

3483 (3)

Project Cases

Swing Turnstile installed at the Entrance of the Community in China

3483 (1)

Product Parameters

Model NO. E3483
Size 1200x280x960mm
Main Material 1.2mm Top cover + 1.0mm Body 304 Stainless steel
Pass Width 600mm for normal pedestrian lane, 1100mm for handicapped lane
Pass Rate ≦35 person/min
Working Voltage DC 24V
Power AC 220±10%V 50HZ
Communication Interface RS485
Open signal Passive signals (Relay signals, Dry contact signals)
MCBF 3,000,000 Cycles
Motor 40K 20W Brushed DC motor
Infrared Sensor 5 pairs
Working Environment ≦90%, No condensation
Applications Campus, Office buldings, Airports, Railways,Hotels, Governemnt Halls, etc
Package Details Packed into wooden cases 
Single/Double: 1285x370x1160mm, 70kg/90kg

  • Previous:
  • Next:

  • Write your message here and send it to us